Extreme Wave-Force Calculation Procedure for 20th Edition of API RP-2A
The paper describes the revised guideline design wave force calculation procedure approved for the 20th edition of the API-RP2A WSD and the first edition of the API-RP2A LRFD and contrasts...
Shear and Interface Strength of Clay at Very Low Effective Stress
Thin-specimen direct shear (TSDS) tests were conducted to measure the shearing strength of kaolinite, and interface strengths between kaolinite and acrylic plastic and anodized aluminum,...
A Solution for Wind-Induced Vortex-Shedding Vibration of the Harmony and Heritage Platforms During Transpacific Tow
This paper describes the results of an advanced procedure for analyzing wind-induced vortex-shedding vibration (VSV) which was used for the transpacific tows of the Harmony and Heritage...
Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Seven
Prepared by the Program Committee of the Offshore Technology Conference of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...
Size and Scale Effects on the Shear Strength of Concrete Beams
This paper identifies and discusses the role of proper geometric scale of relevant parameters in the size effect in shear, particularly in terms of practical beam design. In the overall...
Hurricane Katrina
This chapter provides an overview of Hurricane Katrina, including data on its category, its path and intensity, and its effect on wind and water forces....
Wind
This chapter discusses the tabulation of wind force data in Microsoft Excel....
New Shear Stud Provisions for Composite Beam Design
The 2005 American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 2005) will contain significant changes to the shear connector provisions for...
Members Subjected to Torsion Combined with Other Actions
The combination of torsion with bending and shear (T-M-V) in members with both transverse and longitudinal reinforcement is the most commonly encountered combination in practical cases....
Forensics and Case Studies in Civil Engineering Education: State of the Art
This paper reviews the state of the art in the use of forensic engineering and failure case studies in civil engineering education. The study of engineering failures can offer students...
Control of Wind Response of the Trump World Tower
The Trump World Tower is a luxury residential building located on 1st Ave. and 48th St. in New York City,...
Design of Structure and Damping System to Control Motions of the Park Tower, Chicago
Park Tower, a 67 story condominium/hotel project currently under construction on the Magnificent Mile, Chicago, IL, will be the first building in North America in recent times that utilizes...
Inside Job
River Mill Dam is a large Ambursen (buttress type) dam constructed in 1911 on the Clackamas River in Oregon. The preliminary and final design phase of the seismic upgrade project coincided...
Towers in Motion (available in Structural Engineering Special Section only)
Undersea towers are typically designed to rigidly resist the forces of water and wind. But one type of tower is designed to be flexible and, rather than rely on its platform strength to...
Verdict Rendered
After the Grays Harbor County Courthouse in Montesano, Washington, was severely damaged by an earthquake in 1999, the surrounding community decided to preserve it. A design/build approach...
Cap of Concrete
The roof of a new $84 million arena in New Orleans was built using techniques usually seen in tied-arch concrete bridges. The concrete components of the roof carry the large compression...
Towering Over Xiamen (Available in Structural Engineering Special Issue only)
Composite structural systems are rapidly becoming the preferred choice for high-rise buildings, due to their high strength and stiffness, large ductility, and convenient, economical construction....
Tall Order
Successive earthquakes have damaged the 32-story, 460 ft (140 m) tall Los Angeles City Hall, built in 1926. Masonry infill and concrete walls have cracked, and the terra cotta cladding...
Special Geotechnical Testing: Central Artery/Tunnel Project in Boston, Massachusetts
The Central Artery/Tunnel Project (CA/T) in Boston, Massachusetts, is the largest urban highway construction project in the history of the interstate system. The magnitude and complexity...
Paper Mill Sludge Landfill Cover Construction
A considerable amount of experience has been acquired from a number of completed paper mill sludge landfill covers within the United States. This paper focuses on practical guidelines...
Return to search